Description 100 Pints/day Industrial-level humidity control for small grow operations Energy Efficient Removes up to 2.6 liters per kilowatt hour, helping keep your operation efficient No-Hassle Drainage The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required MERV 11 Filter The self-sealing air filter traps up to 95% of pollutants from the air to protect your plants and the unit’s vital components. Plus it’s easy to replace Flexible Installation Options for suspended, freestanding, or ducted installation Built-in Digital Control The on-board controls include a digital display for intuitive operation and monitoring Optional Remote Control Purchase the remote control to relay diagnostics from the dehumidifier, giving you simple control of the conditions in your cultivation space () 1-2-3 for VPD The unit constantly monitors humidity, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth Built to Last Dependability is at the heart of what Anden do. That’s why Anden offers a 5-year warranty on all parts including the refrigeration system–so you can grow with confidence Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. Installation Options Cultivation rooms come in all shapes and sizes. This Anden Dehumidifier gives you flexible installation options to ensure maximum effectiveness and optimized conditions. SUSPENDED – Saves space in any cultivation room Uses to suspend unit from ceiling Pulls in air, dehumidifies, and returns it to the space Optimizes humidity, temperature, and CO2 for maximum growth INLET AND OUTLET DUCTED – For rooms with limited space Located in separate room, connected by air ducts to cultivation room Ducted with 10” flex duct or hard pipe Optimizes humidity, temperature, and CO2 for maximum growth Specifications Capacity(1) (water removal): 100 ppd Energy factor(1) (efficiency): 2.6 L/kWh (5.5 pints/kWh) Voltage, Phase, Frequency: 120VAC, 1 Phase, 60 Hz Current draw(1): 6.9 Amps Power (Watts)(1): 750 Watts Btu/h(2): 3,040 CFM: 280 Noise: 55 dBA - 59 dBA Inlet air operating conditions during: Dehumidification: 50°F–104°F, 40°F - dew point min. Ventilation: 40°F–140°F, 0%–99% RH (non-condensing) Unit dimensions (cabinet only): 26" L x 14" W x 15" H Unit weight: 64 lbs (1)Rated capacity and energy factor test done and current draw measured at 80°F/60% - RH inlet air at 0.0 ESP. (2)Total cooling load @ 80°F/60% RH.
